How To Clean A New House After Construction?

How To Clean A New House After Construction
What is the best way to clean a home that has just been built? – To begin, collect all of your cleaning goods and place them in a basket or bag that is simple to transport. The equipment that you will need to clean includes a vacuum cleaner, rubber gloves, a dust mask, a bucket, paper towels, a brush, a sponge, soap, a feather duster, rubbing alcohol, rags, and a dustpan.

  • After putting on your rubber gloves and dust mask, you can begin cleaning the following: Use a moist sponge to clean the entirety of the ceilings.
  • Take off any labels on the windows.
  • Completely vacuum each of the window tracks.
  • Clean the insides as well as the outsides of all of the windows.
  • Clean out all of the closets, cabinets, and drawers.

Put some of your cleaning solution in a bucket, get some rags that aren’t too rough, and start wiping down all of the surfaces. Ensure that the kitchen and the bathrooms are spotless once you’re done. Cleaning the interior of the heating and cooling ducts requires a vacuum.

  • If the carpets are really grimy, you should either vacuum them or wash them using carpet shampoo.
  • Clean the light fixtures by wiping them down and then dusting them.
  • Scrub the door and floor thresholds.
  • Please wipe the floors very carefully.
  • Lastly, sweep and vacuum the garage to complete the cleaning.
  • When cleaning up construction dust, pay extra attention to areas that are difficult to access or that go unnoticed, such as beneath radiators and toilet bowls, on top of electrical outlet covers, and other similar locations.

If this is not done, there is a possibility that there may be severe health issues in the long run for the tenants.

What should you clean first in house?

The term “wet spaces” refers to places like bathrooms and kitchens. These often require the biggest amount of time to clean. For this reason, you need to take care of them first in the sequence in which you clean your house. After you have completed steps 1 and 3, begin by dusting everything, and then go on to cleaning your kitchen and bathrooms.

Is construction dust harmful?

NIOSH Update: – Fred Blosser may be reached at (202)260-8519. June 1996 During the building process, breathing in respirable crystalline silica dust can put one at risk for developing a severe or even deadly respiratory illness. Both employers and employees have options at their disposal for mitigating risks and minimizing exposures.

  1. According to an Alert issued by the National Institute for Occupational Safety and Health, employers and workers can take practical steps to reduce risks associated with exposure to respirable crystalline silica dust that can cause silicosis, a serious and potentially fatal respiratory disease.
  2. However, silicosis can only be contracted through prolonged exposure to respirable crystalline silica dust (NIOSH).
See also:  Can I Buy My Parents House For What They Owe?

The NIOSH Alert titled “Request for Assistance in Preventing Silicosis and Death in Construction Workers” provides information regarding the dangers associated with silica exposure among construction workers, makes prevention recommendations, and includes case reports of construction workers who have died from silicosis or are currently suffering from the disease.

When particles of crystalline silica are breathed and become lodged in the lung, a condition known as silicosis can develop. This condition causes the lung tissue to scar and become more rigid. The condition has the potential to slowly sap one’s strength and ultimately lead to death. When performing tasks in the construction industry such as chipping, hammering, drilling, crushing, or hauling rock; performing abrasive blasting; and sawing, hammering, drilling, and sweeping concrete or masonry, workers have a high risk of being exposed to silica due to the presence of rock that contains silica or concrete and masonry products that contain silica sand.

Silica exposure can also occur when using rock that contains silica sand. When handled in a manner that generates significant dust concentrations, even materials containing just trace quantities of crystalline silica can be harmful. According to NIOSH Director Linda Rosenstock, M.D., M.P.H., “the human and economic consequences of silicosis are intolerable.” “It is imperative that government, business, labor, and the public health community work together to assist employers and employees identify these hazards and take action to prevent them.” On the page that follows, you will find some tips for mitigating your exposure to silica in the workplace and warding off silicosis.

There is a lack of information among certain individuals working in the construction business regarding the nature of silicosis, the sources of silica exposure, and the factors that lead to the development of the illness. The dangers of breathing in respirable crystalline silica need to be brought to the attention of construction workers, construction managers, and equipment makers as soon as possible.

See also:  How To Clean Mac Screen At Home?

The National Institute for Occupational Safety and Health (NIOSH) begs your cooperation in sharing this information to individuals who are at risk and to those who may take preventative measures. The National Institute for Occupational Safety and Health (NIOSH) suggests the following preventative steps to lessen occupational exposures to respirable crystalline silica, therefore lowering the risk of silicosis and reducing the number of fatalities among construction workers: Recognize the potential for the generation of silica dust and make preparations in advance to either eradicate or regulate the dust where it originates.

  • Silicosis may be prevented, in part, by education and careful planning.
  • As a material for abrasive blasting, you should never make use of silica sand or any other product that contains more than 1% crystalline silica.
  • Substitute less hazardous materials.
  • Utilize engineering controls and containment procedures such as blast–cleaning equipment and cabinets, wet drilling, or wet sawing of silica–containing materials in order to reduce the risk of exposure to neighboring personnel, as well as to limit the hazard.

Dust control systems need to have routine maintenance performed on them to ensure that they remain in excellent operating condition. Maintaining proper personal cleanliness might help you prevent unneeded exposure to other toxins at your place of employment, such as lead.

At the job, you should dress in protective clothing that is either disposable or washable. Before leaving the construction site, it is important to take a shower (if one is available) and change into clean clothing in order to prevent the contamination of nearby vehicles, residences, and other work locations.

Conduct air monitoring to measure the exposures of employees and ensure that controls are providing appropriate protection for workers by ensuring that controls are providing adequate protection for workers. When source controls are not sufficient to maintain silica exposures below the NIOSH REL, effective respiratory protection should be used.

  • It is necessary to conduct routine medical checks on all employees who have the potential to be exposed to respirable crystalline silica.
  • Place cautionary notices at the entrances and exits of any work locations that contain respirable crystalline silica and identify their boundaries.
  • It is important to provide workers with training that includes knowledge on the health impacts of respirable crystalline silica, as well as information regarding work procedures and protective equipment.
See also:  What Age Can You Buy A House?

Please notify the state health agencies and OSHA of any and all cases of silicosis. NIOSH Publication No.96–120 Under the Direction of the DDHS Get a copy of the NIOSH Alert titled “Request for Assistance in Preventing Silicosis and Death in Construction Workers,” DHHS (NIOSH) Publication No.96-112, or contact 1-800-35-NIOSH or 1-800-356-4674 for information on additional occupational safety and health problems.

Why do new build houses get so dusty?

The Infocomm World Why Is There So Much Dust in My Newly Built House? Dust in the home can be caused in large part by the dirt tracked in on people’s shoes and pets’ paws, as well as by airborne particles that become embedded in carpet fibers. It may be helpful to vacuum more often (daily or every other day), provided that part of the dust is not recirculated into the living space while you are sucking it up.

Is it better to vacuum or dust first?

Organize Your Cleaning – 0406 msl dusters.jpg Dust the area beforehand while performing your thorough cleaning so that you can vacuum up any dust particles that may float into the air while you work and land on the floor.

Should I mop or vacuum first?

October 19, 2021 – by Modern Maids Many cleaning experts advise vacuuming before mopping. Vacuuming will make it simpler for you to sweep and clean afterwards, especially if your interior floor is made of hard surfaces. Instead of cleaning first, some people prefer to dust, sweep, and vacuum the area first.

Do air purifiers help with construction dust?

Reduce dust: Begin by cutting back on the amount of dust that is produced. If at all possible, cut and sand outside. If not, mist surfaces and affix dust-gathering vacuums to saws and sanders. A certain amount of dust will unavoidably accumulate; attempt to prevent it from doing so.

  1. Cover the flooring and seal off all doorways with protective plastic sheeting.
  2. A FiltreteTM Room Air Purifier with a True HEPA filter, which helps collect 99.97% of airborne particles*, including construction dust, should be placed in the room.
  3. HVAC vents should also be covered or closed.
  4. When working on large projects, use a high-quality furnace filter and replace it every week.

After finishing, carefully vacuum the area.